DA-115 (Program switch on the right side)

• • Connect the station to the system hardwired or to a telephone line.
    
    
  • Turn the Program Switch (right side of station) to On.
    
    
  • Press the Store button.
    
    
  • Dial the number/s on the keypad that you want to program. Use the Pause button if you need to insert a pause.
    
    
  • Press the dialer button where you want the number stored.
    
    
  • Press Log On then Disconnect to reset the station.
    
    
  • Repeat to program additional dialers.
    
    
  • Turn the Program Switch (right side of station) to Off.